Any damage around the teeth surfaces of the sprocket diminishes the daily life with the conveyor chain.
With standard sprockets, substantially worn sprocket teeth had been repaired by teeth padding or even the total sprocket was replaced. In both situation, restore was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our shoppers for the dramatic savings in expense and time.
The teeth could be replaced by two approaches: person tooth substitute or sectional teeth substitute.
The bolts and nuts used for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated about the suitable.
The over photo along with the major proper illustration present a sprocket for person tooth replacement. Since the joint face in between the replaced teeth and the sprocket is formed inside a one of a kind arc, the bonding accuracy is substantial as well as sprocket power is enhanced. Additionally, because the load acting on the mounting bolts is decreased, there is less possibility of loosening. This sprocket building is patented.
You will discover two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for large sprockets receiving heavy loads and welded sheet steel hubs for other applications.