Common Description
Equipped with the zero leak bidirectional checking sole-noid valves, this power unit is made for that operation of two independent circuits. Which are respectively for your main and subordinate platforms from the double scissors lift. Two cut-off valves are applied for reducing the machine manually in case of power reduction. If much more independent circuits are needed for the application please get in touch with us for availability.
Remark: one. Please consult our sales engineer for the different pump displacement, motor energy or tank capability.
two. CSA or UL certified motors can be found on request.
Distinctive Notes
1. The AC motor is of S3 duty cycle, which can only do the job intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic elements concerned prior to set up of the electrical power unit.
3. Viscosity of your oil shoud be 15~46 cst,and the oil ought to be clean and totally free of impurities,N46 hydraulic oil is proposed.
4. The energy unit need to be mounted vertically.
5. Check the oil level while in the tank after the preliminary running on the electrical power unit.
6. Oil transforming is required just after the preliminary 100 operation hours,afterwards once each 3000 hours.