We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
one. HS series slurry pump is created for the steady pumping of higher abrasive, large density slurries with nominal servicing demands. The sporting parts are made of ultra chrome or and rubber. It will preserve high performance more than the wear life of its factors.
2. The steel moist elements and rubber ones can be interchangeable for handling diverse liquids or slurries.
3. HS slurry pumps are available in dimensions ranging from 1 inch to 18 inch discharge and feature large efficiency efficiency able of stream costs from 10.8 to 5400 m³/h and heads up to 125 meters for high head designs.
Characteristics:
1. Cylindrical composition of bearing assembly: practical to adju EPT the room between impeller and EPT liner
and can beremoved comple tel: +86~thirteen 0571 88828y
2. Interchangeable anti-abrasive wet components made of substantial-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs provide substantial running strain capabilities
and an added measure of security.
4. The discharge department can be oriented to any eight positions at the interval of forty five levels
five. A variety of generate varieties: DC(direct relationship), V-belt generate, gear box reducer, hydraulic couplings, VFD,
S EPT management, etc
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Common Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Design |
| • Alumina Market | • Power Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Product | Max Electricity (Kw) |
Inlet & Outlet dimensions (inch) | Material for Dress in Elements | Stream Charge (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | twelve.6~28.8 | three.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | ten.8~twenty five.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.4~seventy two | 9~20 | six~fifty eight | 1200~3200 | 184 |
| R | 25.2~54 | 7~15 | five.5~forty one | one thousand~2600 | 178 | |||
| 50HS-C | 30 | three/two | M | 39.6~86.4 | 11~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.4~198 | 24~55 | 9~52 | a thousand~2200 | 245 |
| R | seventy nine.2~one hundred eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | 40~100 | 12~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/six | M | 360~828 | 100~230 | ten~sixty one | 500~1140 | 510 |
| R | 324~720 | 90~200 | seven~49 | four hundred~1000 | 510 | |||
| 200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | 11~sixty one | four hundred~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | seven~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | 7~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | thirteen~44 | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | 700~1500 | 13~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | 30 | one.5/one | M | 16.2~34.2 | four.5~9.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | sixty eight.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | six/4 | M | 324~720 | 90~200 | thirty~118 | 600~a thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | 20~ninety four | five hundred~1000 | 711 |
For the material of putting on components,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
Make contact with
Welcome to contact us any time for specifics.
Your inquiry will get our prompt consideration and reaction !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic gear manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the listed substitute components contained herein are not sponsored, approved, or created by the OEM.
