one.A connecting website link of an O-ring Chain for general application is pre-coated with grease on the pins. Ahead of connection, verify the grease on the surfaces of pins, and should the level of grease is smaller, apply grease with bare hands. (If gloves are utilized, the grease is going to be absorbed through the gloves.)
Illustration: Once the connecting link (I) of an O-ring chain for common application is
shipped, O-rings are fitted in the roots in the pins. In the event the O-rings come loose because of vibration during transport, refit the O-rings in to the roots with the pins.
In this case, be sure to return the grease collected in the roots in the pins for the central surfaces from the pins, additional at portion A than at portions B shown during the over illustration. (Portions A is worn due to sliding using the bushings.)
two.The chain may be most effortlessly linked to the teeth of a sprocket. Engage the hyperlinks at both ends of your chain using the sprocket teeth and match connecting pins. Should the sprocket could be moved, the chain can also be connected on the loosened side.
3. Connecting method
1.Confirm that O-rings are attached on the roots on the pins.
2.In the event the volume of grease utilized to the connecting pins is compact, coat the pins with grease in the central portions.
three.Insert the connecting pins to the bushings with the inner back links at each ends.
4.Verify the grease is applied to your total face of your O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and when pressing the connecting plate, set up the spring clip. Confirm regardless of whether the head (the 
finish without a split) in the spring clip is turned within the feeding route with the chain. (See the next illustration.)
six.Be sure to confirm that the spring clip is securely fitted during the clip grooves on the connecting pins.
This completes jointing on the connecting link. Note that grease about the surfaces of connecting pins and O-rings might be eliminated all through set up get the job done. In this case, re-grease utilizing the grease to the surface of your base chain or the grease from the polyethylene bag in which the connecting website link was contained.
