Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is especially created for gear coupling applications to improve coupling life while drastically decreasing servicing time. Its substantial viscosity base oil and tackifier mix to help keep the grease in area and protect against separation and it is in complete compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in color and manufactured that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to large centrifugal forces typically uncovered in couplings. Bearing or general objective greases usually separate and lose effectiveness as a result of large centrifugal forces over the numerous substances at large rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from your thickeners. Hefty thickeners, which have no lubrication qualities, accumulate from the gear tooth mesh area leading to premature coupling failure. Gear Coupling Grease is built to very resistant to centrifugal separation of your oil and thickener, which allows the lubricant to be employed to get a somewhat long time period of time.
One of several tricks on the results of Gear Coupling Grease will be the variable consistency through the entire operating cycle on the application. The consistency of our gear coupling grease changes together with the working problems. Working on the lubricant beneath real support circumstances leads to the grease to grow to be semi-fluid, functionally solash lubricating the put on surfaces on the coupling. Since the grease cools, it returns to the original consistency, therefore preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust safety
High load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in location below large speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated by using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?