KC aluminum alloy shell

KC铝合金造壳高速运转，需对联轴器保护罩进行保护。罩壳针对不同类型的联轴器配套设计，能起到   防护作用。

KC铝合金造壳的技术特点：

1、罩壳高度可调，适应多种   高，操作简单，使用方便。

2、的防护，保护机器及使用者的   。

KC铝合金造壳种类繁多，按照被连接两轴的相对位置和位置的变动情况，可以分为：

①Fixed coupling.It is mainly used in places where two shafts require strict alignment and no relative displacement occurs during work. The structure is generally simple, easy to manufacture, and the instantaneous speed of the two shafts is the same, mainly including flange couplings, sleeve couplings, and clamps Shell couplings, etc.

②Removable coupling.It is mainly used where the two shafts are deviated or have relative displacement during work. According to the method of compensating displacement, it can be divided into rigid movable coupling and elastic movable coupling.Rigid movable coupling uses the dynamic connection between the working parts of the coupling to have a certain direction or several directions to compensate, such as jaw coupling (allowing axial displacement), cross groove coupling (Used to connect two shafts with small parallel displacement or angular displacement), universal coupling (used in places where the two shafts have a large deflection angle or a large angular displacement during work), gear coupling (Comprehensive displacement allowed), chain couplings (radial displacement allowed), etc., elastic movable couplings (referred to as elastic couplings) use the elastic deformation of elastic elements to compensate for the deflection and displacement of the two shafts, and at the same time Elastic elements also have cushioning and vibration reduction properties, such as serpentine spring couplings, radial multilayer leaf spring couplings, elastic ring pin couplings, nylon pin couplings, rubber sleeve couplings, etc. .Some couplings have been standardized.When selecting, you should first select the appropriate type according to the work requirements, and then calculate the torque and speed according to the diameter of the shaft, and then find out the applicable models from the relevant manuals, and check some key parts.

KC铝合金造壳是联轴器配件中的一种，产品质量有，欢迎前来选购。联轴器用来联接不同机构中的两根轴（主动轴和从动轴）使之共同旋转以传递扭矩的机械零件。在高速重载的动力传动中，有些联轴器还有缓冲、减振和提高轴系动态性能的作用。联轴器由两半部分组成，分别与主动轴和从动轴联接。一般动力机大都借助于联轴器与工作机相联接。