SWP-E type-with telescopic short universal coupling

SWP-E型-有伸缩短型万向联轴器用来联接不同机构中的两根轴（主动轴和从动轴）使之共同旋转以传递扭矩的机械零件，在高速重载的动力传动中，有些联轴器还有缓冲、减振和提高轴系动态性能的作用。

万向联轴器适用于联结空间同一平面上两轴轴线夹角β≤45o的传动场合，传递公称转矩11.2-1120N.m.WSD型为单十字万向联轴器，WS型为双十字万向联轴器每节轴间夹角45o.成品孔H7，可根据要求，开键槽，六方孔和四方孔.允许两轴间夹角在限定的范围内随工作需要而改变。

用来联接不同机构中的两根轴（主动轴和从动轴），使之共同旋转，以传递扭矩的机械零件。在高速重载的动力传动中，有些联轴器还有缓冲、减振和提高轴系动态性能的作用。联轴器由两半部分组成，分别与主动轴和从动轴联接。一般动力机大都借助于联轴器与工作机相联接。

联轴器由两半部分组成，分别与主动轴和从动轴联接。一般动力机大都借助于联轴器与工作机相联接。联轴器种类繁多，按照被联接两轴的相对位置和位置的变动情况，可以分为：

①Fixed coupling.It is mainly used in places where two shafts require strict alignment and no relative displacement occurs during work. The structure is generally simple, easy to manufacture, and the instantaneous speed of the two shafts is the same, mainly including flange couplings, sleeve couplings, and clamps Shell couplings, etc.

②Removable coupling.It is mainly used where the two shafts are deviated or have relative displacement during work. According to the method of compensating displacement, it can be divided into rigid movable coupling and elastic movable coupling.Rigid movable couplings use the dynamic connection between the working parts of the coupling to have a certain direction or several directions of mobility to compensate, such as jaw coupling (allowing axial displacement), cross groove coupling (Used to connect two shafts with small parallel displacement or angular displacement), universal coupling (used in places where the two shafts have a large deflection angle or a large angular displacement during work), gear coupling (Comprehensive displacement allowed), chain couplings (radial displacement allowed), etc., elastic movable couplings (referred to as elastic couplings) use elastic deformation of elastic elements to compensate for the deflection and displacement of the two shafts, Elastic elements also have buffering and damping properties, such as serpentine spring couplings, radial multilayer leaf spring couplings, elastic ring pin couplings, nylon pin couplings, rubber sleeve couplings, etc. .Some couplings have been standardized.When selecting, you should first select the appropriate type according to the work requirements, and then calculate the torque and speed according to the shaft diameter, and then find out the applicable models from the relevant manuals, and check some key parts.