Three-jaw coupling for pump

The three-jaw coupling for pumps is a kind of water pump coupling. The middle sliding block is made of cloth-filled bakelite or polyurethane. It is light in weight, simple in structure, easy to install, and inexpensive. It is often used in small power occasions and is suitable for rotating Two-axis connection with low torque, high speed, and no sharp impact.The transmission torque of nylon slider is small, but it is suitable for high-speed operation and does not need lubrication. The standard code of the water pump industry is Bl104.

①The middle sliding block of the claw coupling is made of cloth bakelite or nylon;

②Small size, light weight, simple structure, easy to install, cheap, often used in small power occasions;

③Small inertia force, suitable for two-axis connection with low torque, high speed and no sharp impact

Pick up.The transmission torque of nylon slider is small, but it is suitable for high-speed operation and does not need lubrication;

④许用相对径向位移(0.01d+0.25)mm，d为轴直径(mm)；许用相对角位移0度40分；联轴器的附加径向力为(0.1～0.3)P；

⑤The standard code of the water pump industry is Bl104, its allowable torque is 850N·m, and the shaft diameter is 50mm