HangzhouJSB type axial mounting coupling

The J-type axial installation coupling is used in a variety of different host products, and the surrounding working environment is more complicated, such as temperature, humidity, water, steam, dust, sand, oil, acid, alkali, corrosive medium, salt water, radiation, etc. Condition is one of the important factors to consider when choosing a coupling.For the working quality of high temperature, low temperature, oil, acid and alkali medium, it is not suitable to choose the flexible coupling with general rubber as the elastic element material, and the flexible coupling with metal elastic element should be selected, suchDiaphragm coupling, Serpentine spring coupling, etc.

The J-type axial mounting coupling is a structured metal elastic coupling.It uses a serpentine spring leaf to be axially embedded in the tooth grooves of the two halves of the coupling to realize the connection between the prime mover and the working machine. Due to the performance of the reed, the resonance phenomenon between the prime mover and the working machine is largely avoided. , The service life is much longer than the non-metal elastic element coupling; the tooth surface contacted by the reed is arc-shaped, and the size of the contact surface changes with the size of the transmitted torque, so it can withstand large load changes. The short-term overload capacity is 2 to 3 times of the rated torque, and the transmission efficiency reaches 99%.