HangzhouFCL type elastic sleeve pin coupling

FCL type elastic sleeve pin coupling has the performance of compensating the relative deviation of the two shafts. It is suitable for medium and high power transmission, and is not suitable for working parts that require vibration reduction and strict noise control.The elastic sleeve pin coupling is a pin made of several non-metallic materials, which is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are realized by transmitting torque through the pins.器连接。 Connectors.

Reasons for less allowable compensation

The reason why the allowable compensation amount for the axis displacement of the FCL elastic sleeve pin coupling is small is as follows:

XNUMX. FCL-type elastic sleeve pin coupling relies on the locking force of the pin group to generate the frictional moment on the contact surface, and compress the rubber elastic sleeve to transmit the torque.It is suitable for small and medium-power shafting transmissions with good rigidity of the installation base, high centering accuracy, low impact load, and low vibration reduction requirements.

XNUMX. The work of the elastic sleeve is compressed and deformed. Because the thickness of the elastic sleeve is thin, the volume is small, and the elastic deformation is limited, the elastic sleeve pin coupling can compensate the axis displacement and elasticity, but the allowable compensation amount for the axis displacement is relatively large. Less, weaker elasticity.　 

XNUMX. FCL-type elastic sleeve pin coupling has a relatively simple structure, easy to manufacture, no lubrication, no need to bond with metal vulcanization, easy to replace the elastic sleeve, no need to move the half coupling, with compensation for the relative offset and reduction of the two shafts Vibration buffer performance.