HangzhouHLL type-elastic pin coupling with brake wheel

HLL type-with brake wheelElastic pin couplingIt has been listed as standard GB5014-85, which is suitable for all kinds of transmission shafts that mechanically connect two coaxial lines, and is usually used for frequent high and low speed motions.

HLL type-elastic pin coupling with brake wheel has a simple structure, easy to manufacture, easy to assemble and disassemble the elastic element, no need to move the two halves of the coupling.The material of the elastic element (elastic pin) is generally nylon, which has the ability to compensate the deviation of the two axes in a small amount. The elastic part is sheared when working, and the workability is poor. It is only suitable for the medium-speed transmission shaft system with very low requirements, not suitable for work. Highly demanding working conditions.

HLL type-elastic pin coupling with brake wheel has a working temperature of -20～+80℃; the nominal torque of transmission is 40～20000N.m. HLL type elastic pin coupling with brake wheel has a relatively large structure, simple and reasonable, convenient maintenance, symmetrical and interchangeable on both sides, long life, allowing large axial movement, and has buffering, shock absorption, and other properties.

Technical parameters of HLL type-elastic pin coupling with brake wheel:

Nominal torque Tn: 315N.m

Allowable speed n: 5600r/min

轴孔直径范围：20、22、24、25、28、30、32、35mm

轴孔直径长度Y型L：52、62、82，J,J1,Z型：38、52、44、62、60、82mm

Brake wheel size D0: 200mm

Large outer diameter D: 120mm