Product Description

Hot sale: low noise,no leakage, no additional cost for motor shaft coupling magnetic clutch magnetic pump

Introduction of motor shaft coupling magnetic clutch magnetic pump

Magnetic shaft coupling is a new kind of coupling, which connects motor and machine by permanent magnetic force. 

They are consisted of external rotor, internal rotor and isolating covers.

They work in the sealed magnetic drive pumps, which transporting volatile, flammable, explosive and toxic solutions with no leakage. 

These magnetic shaft couplings can be used to connect gear pumps , screw pumps, centrifugal pumps, etc. with all types of electric motor or gear box. 

Magnetic shaft coupling are widely used in various industries and fields, such as chemical, papermaking, foodstuff, pharmacy, and so on. 

Advantages of motor shaft coupling magnetic clutch magnetic pump

» Elimination of fluid leakage from the pump shaft.

» Vibrations are not transmitted to the pump.

» No maintenance required for magnetic couplings.

» Using magnetic couplings allows use of standard pumps without expensive mechanical seals.

» No additional cost for purchasing mechanical seal spare parts and maintenance.

 

Technical drawing of motor shaft coupling magnetic clutch magnetic pump

Specification of motor shaft coupling magnetic clutch magnetic pump

Item

Internal Rotor(mm)

External Rotor(mm)

Isolating Covering(mm)

A

B

C

D

E

F

G

Shaft Pin

H

I

J

L

N

M

P

Q

R

S

T

U

GME03-3LM00

Φ35

–

Φ10

26

–

18

–

M6X12

Φ42

Φ60

Φ50

46

6-M4

Φ40

Φ50

4-Φ5.4

Φ38

Φ60

6

6

GME03-5MM00

Φ42

–

Φ12

27

4

18

13.8

M6X16

Φ49

Φ72

Φ60

46

4-Φ6.7

Φ52

Φ60

4-Φ6.7

Φ44

Φ74

8

8

GME03-16LM00

Φ56

–

Φ12

45

4

25

13.8

M6X16

Φ63

Φ89

Φ80

75

6-M5

Φ70

Φ75

4-Φ6.7

Φ58

Φ89

8

8

GME03-16LM01

Φ56

–

Φ12

45

4

25

13.8

M6X16

Φ63

Φ89

Φ80

75

4-M5

Φ70

Φ75

4-Φ6.7

Φ58

Φ89

6

10

GME03-16MM00

Φ56

–

Φ12

45

4

25

13.8

M6X16

Φ63

Φ89

Φ80

75

6-M5

Φ70

Φ75

4-Φ6.7

Φ58

Φ89

8

8

GME03-22LM00

Φ88

–

Φ20

29

6

25

22.8

M8X20

Φ97

Φ122

Φ110

70

8-M6

Φ98

Φ108

6-Φ6.7

Φ91

Φ122

8

8

GME03-30LM00

Φ88

–

Φ20

48

6

30

22.8

M8X20

Φ97

Φ122

Φ110

81

8-M6

Φ98

Φ108

6-Φ6.7

Φ91

Φ122

8

8

GME03-40LM00

Φ101

–

Φ25

49

8

28

28.3

M10X20

Φ109

Φ140

Φ124

83

8-M8

Φ110

Φ126

8-Φ6.7

Φ103

Φ140

12

6

GME03-50LM00

Φ107

–

Φ20

70

6

30

22.8

M6X16

Φ113.4

Φ145

Φ135

80

4-M6

Φ126

Φ133

12-Φ8.7

Φ109

Φ153

12

15

GME03-65LM00

Φ101

–

Φ25

77

8

45

28.3

M10X20

Φ109

Φ140

Φ124

111

8-M8

Φ110

Φ126

8-Φ6.7

Φ103

Φ140

12

6

GME03-80LM00

Φ106

–

Φ32

65

10

21

36.5

M6X25

Φ115

Φ145

Φ135

82

4-M6

Φ127

Φ135

6-Φ8.7

Φ110

Φ153

13

18

GME03-80LM00

Φ141

Φ92

Φ40

65

12

45

43.3

M12X25

Φ152

Φ180

Φ168

100

8-M8

Φ154

Φ164

8-Φ6.7

Φ145

Φ180

12

8

GME03-100LM00

Φ131

Φ82

Φ32

80

10

24.5

35.3

M8X35

Φ139

Φ170

Φ160

100

4-M6

Φ152

Φ158

8-Φ8.7

Φ133

Φ178

14

21

GME03-110LH00

Φ141

Φ92

Φ40

85

10

50

43.3

M12X25

Φ152

Φ184

Φ168

115

12-M8

Φ156

Φ164

12-Φ6.7

Φ145

Φ180

12

3

GME03-110LM00

Φ141

Φ92

Φ35

80

10

55

38.3

M12X25

Φ152

Φ180

Φ168

115

12-M8

Φ154

Φ164

12-Φ6.7

Φ145

Φ180

12

3

GME03-140LM00

Φ141

Φ92

Φ40

110

12

80

43.3

M12X25

Φ152

Φ190

Φ170

145

12-M10

Φ154

Φ164

12-Φ6.7

Φ145

Φ180

12

3

GME03-180LM00

Φ141

Φ92

Φ40

140

12

95

43.3

M12X25

Φ152

Φ190

Φ170

175

12-M10

Φ154

Φ164

12-Φ6.7

Φ145

Φ180

12

3

GME03-220LM00

Φ141

Φ92

Φ48

160

14

110

51.8

M12X25

Φ152

Φ190

Φ170

195

12-M10

Φ154

Φ164

12-Φ6.7

Φ145

Φ180

12

3

GME03-300LM00

Φ162

–

Φ65

100

18

60

69.4

Φ170

Φ198

Φ188

123

12-M6

Φ180

Φ192

12-Φ11

Φ163.5

Φ218

16

10

GME03-400LH00

Φ195

–

Φ70

127

20

107

79.9

M12X25

Φ203

Φ234

Φ222

152

6-M6

Φ212

Φ164

12-Φ11

Φ198

Φ278

16

22

Application of motor shaft coupling magnetic clutch magnetic pump

The ability to hermetically separate 2 areas whilst continuing to transmit mechanical power from one to the other makes these couplings ideal for applications where prevention of cross contamination is essential. For instance: hydraulic sectors, dosing systems, compressors, sterilizers, industrial ovens, biotechnology, subsea equipment, pharmaceutical industry, chemical industry, food industry, generators and mixers.

 

 

 

Operation principles of motor shaft coupling magnetic clutch magnetic pump

The magnetic coupling works by using the power generated by permanent magnets. No external power supply is needed. These are permanent magnets not electro magnets.

 

Packing Method of motor shaft coupling magnetic clutch magnetic pump

Double strength corrugated Carton and Wood case Sea Packing.

 

GME core values
Quality is our life. Customer satisfaction is our CHINAMFG pursuit. Everything we do at CHINAMFG is driven by an unyielding passion for CHINAMFG in identifying and delivering solutions that exceed expectations.
In today’s fast-developing global economy, innovation is critical to a company’s survival. We anticipate and adapt to changing for continuous improvement.
A business cannot be successful unless it creates prosperity and opportunity for others. We have a dream–customers could win more through our Great Service; we have a dream–GME members could realize their own dreams while striving for CHINAMFG Dream.
Sustainability isn’t only important for people and the planet, but also is vital for business success. We are environmentally responsible and drive to sustainability. And we should do something for our better future.

For more information, please refer to greatmagtech  or greatmagtech  directly.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Maintenance Requirements for Magnetic Couplings to Ensure Long-Term Performance

Magnetic couplings are designed to be low-maintenance compared to traditional mechanical couplings. However, some maintenance practices can help ensure their long-term performance and reliability. Here are the key maintenance requirements for magnetic couplings:

1. Regular Inspection:

   Perform regular visual inspections of the magnetic coupling to check for signs of wear, damage, or misalignment. Look for any unusual noises or vibrations during operation, which may indicate a potential issue that requires attention.

2. Cleanliness:

   Keep the magnetic coupling and surrounding area clean and free from dirt, debris, or contaminants. Foreign particles on the coupling’s surface can affect its magnetic performance and lead to energy losses.

3. Lubrication:

   Magnetic couplings do not require traditional lubrication since they operate without physical contact. However, some couplings may have bearings or other components that require lubrication. Refer to the manufacturer’s guidelines for specific lubrication requirements.

4. Environmental Considerations:

   Ensure that the operating environment of the magnetic coupling is within the specified limits provided by the manufacturer. Extreme temperatures, aggressive chemicals, or other harsh conditions can affect the performance and longevity of the coupling.

5. Alignment Check:

   Periodically check the alignment of the driving and driven shafts. Although magnetic couplings can tolerate some misalignment, ensuring proper alignment will optimize efficiency and reduce stress on the coupling components.

6. Torque and Speed Limits:

   Adhere to the specified torque and speed limits for the magnetic coupling based on the application requirements. Operating the coupling beyond its rated capacity can lead to premature failure.

7. Overload Protection:

   If the application involves occasional overloads, consider incorporating overload protection features, such as torque limiters or slip mechanisms, to prevent damage to the coupling and connected equipment.

8. Regular Maintenance Schedule:

   Establish a regular maintenance schedule based on the manufacturer’s recommendations. Periodic inspections, cleaning, and other maintenance tasks can help identify and address potential issues before they escalate.

9. Expert Support:

   When in doubt or if encountering any significant issues, seek assistance from the magnetic coupling manufacturer or a qualified engineer. They can provide guidance on maintenance best practices and address any specific concerns related to the coupling’s performance.

By following these maintenance requirements, you can ensure the long-term performance, reliability, and efficiency of the magnetic coupling in your application.

Where Can I Find Reputable Suppliers or Manufacturers of Magnetic Couplings for Specific Engineering Needs?

When searching for reputable suppliers or manufacturers of magnetic couplings, it is essential to consider several factors to meet your specific engineering needs. Here are some valuable resources and steps to help you find reliable suppliers:

1. Online Directories:

   Online directories, such as ThomasNet, Alibaba, and GlobalSpec, are valuable platforms to search for manufacturers and suppliers of magnetic couplings. These directories provide detailed information about companies, their products, and their capabilities, making it easier to identify potential suppliers.

2. Trade Shows and Conferences:

   Attending trade shows and engineering conferences related to your industry can be an excellent way to meet and connect with magnetic coupling manufacturers in person. These events provide an opportunity to see product demonstrations, discuss your specific needs, and establish direct contacts with suppliers.

3. Industry Associations:

   Industry associations and organizations often have a network of members, including suppliers and manufacturers of various engineering components. They may provide valuable recommendations and insights on reputable suppliers of magnetic couplings within your industry.

4. Referrals and Recommendations:

   Seeking referrals from colleagues or industry professionals who have experience with magnetic couplings can be valuable. Recommendations from trusted sources can save time and help you find reliable suppliers.

5. Online Research:

   Performing online research and reading customer reviews and testimonials can give you insights into the reputation and reliability of different magnetic coupling suppliers. Look for manufacturers with positive feedback and a track record of delivering quality products.

6. Supplier Websites:

   Visit the websites of potential magnetic coupling suppliers to learn more about their products, services, and manufacturing capabilities. Look for suppliers with a comprehensive product range, engineering expertise, and a commitment to meeting specific customer requirements.

7. Customization Options:

   Consider suppliers who offer customization options to meet your specific engineering needs. Magnetic couplings may need to be tailored for particular torque, speed, or environmental requirements, so selecting a manufacturer with the ability to create bespoke solutions is essential.

It is crucial to establish clear communication with potential suppliers, sharing your engineering specifications and expectations. Requesting samples or prototypes, if possible, can also help evaluate the suitability of the magnetic couplings for your specific applications. Ultimately, choosing a reputable and experienced supplier will ensure that you receive high-quality magnetic couplings that meet your engineering needs and contribute to the success of your projects.

What is a Magnetic Coupling and How Does It Function in Mechanical Power Transmission?

A magnetic coupling is a type of coupling used in mechanical power transmission systems to transfer torque from one shaft to another without direct physical contact. It operates based on the principles of magnetism and is designed to transmit rotational power while allowing a degree of misalignment and isolation between the input and output shafts.

The basic components of a magnetic coupling typically include an outer and inner rotor, both containing permanent magnets. The outer rotor is connected to the input shaft, while the inner rotor is connected to the output shaft. These rotors are separated by a non-magnetic containment shell, creating a magnetic air gap between them.

When the input shaft rotates, the magnets on the outer rotor create a magnetic field that passes through the containment shell and induces a corresponding magnetic field in the inner rotor. The interaction between these magnetic fields causes the inner rotor to rotate synchronously with the outer rotor, effectively transferring torque from one shaft to the other.

The key features and functions of magnetic couplings in mechanical power transmission are as follows:

• Non-Contact Power Transmission:

  Unlike traditional mechanical couplings that require physical contact between components, a magnetic coupling achieves torque transmission through magnetic fields, enabling a non-contact power transfer.

• Misalignment Compensation:

  The magnetic coupling can accommodate a certain amount of misalignment between the input and output shafts. This feature helps prevent excessive forces and wear on the system, improving its overall reliability.

• Isolation and Containment:

  The containment shell between the rotors isolates the input and output shafts, making the magnetic coupling ideal for applications where fluid or gas containment is critical. It allows for hermetically sealed connections in pumps, mixers, and other equipment.

• Overload Protection:

  In case of sudden overload or jamming in the driven system, the magnetic coupling can slip or disengage, protecting the driving motor and components from damage.

• No Lubrication Requirements:

  Since there is no physical contact, magnetic couplings do not require lubrication, reducing maintenance needs and the risk of contamination in sensitive applications.

• No Wear or Friction:

  The absence of mechanical contact eliminates wear and friction between the coupling’s components, leading to a longer service life and higher efficiency.

Magnetic couplings find applications in various industries, such as chemical processing, food and beverage, medical devices, and pumps, where leakage prevention, cleanliness, and reliability are essential.

editor by CX 2024-01-12