The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Even so, in response towards the demands for smaller chains in recent times for large technologies machinery such as office products, healthcare machines and industrial robots, we present 15 of four.7625 mm (3/16 inch) pitch and also 15H1 being a high-power version of 15. These substantial precision chains are manufactured beneath serious high quality control specifically necessary for compact sizes, taking wear resistance also under consideration.
Variety of chain
Refer on the “Low-speed selection”. However, the chain operation speed could be set substantially substantial based upon the type of lubrication as shown while in the table under.
Connecting hyperlinks and offset backlinks
R connecting links are made use of for smaller pitch chains. Nonetheless, considering that their power is reduce than that on the base chain, and since the clip is likely to come off in higher velocity operation, the use of connecting links just isn’t advisable. Use a loop chain with no attaching connecting hyperlinks.
Offset back links are available for chains other than 15 and 15H1, but their use will not be advised for your similar purpose as stated for your R Connecting backlinks.
Working speed and form of lubrication
15: A higher precision mini-pitch bushing chain that is smaller sized than a compact drive chain for general applications, 25
25: Smallest bushing chain among ANSI common chains utilizing curl bushings.
35: A ANSI common bushing chain suitable for little precision machines that call for higher power.