DUMP TRAILER Electrical power UNIT

by | Jan 18, 2021 | couplingmagnetic

https://couplingmagnetic.com/dump-trailer-electrical-power-unit/

DUMP TRAILER Power UNIT-DOUBLE ACTING
General Description
This electrical power unit includes a power up energy down circuit with load holding on both A & B ports. A strain compensatred movement management is often extra to circuit to regulate the decent velocity of your cylinder.
Special Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned before set up of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities. N46 hydraulic oil is proposed.
four. The electrical power unit ought to be mounted horizontally.
five. Check the oil degree while in the tank soon after the initial running on the power unit.
6. Oil changing is needed just after the initial a hundred operation hrs, afterwards after every 3000 hours.

DUMP TRAILER Energy UNIT- SINGLE ACTING
General Description
This power unit features a energy up gravity down circuit. Start off the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve could be supplied if essential. Also a pressure compen sated movement control might be added towards the circuit to regulate the descent velocity on the cylinder.
Remark: Please seek the advice of our sales engineer for the different pump displacement, motor power or tank capability.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned before set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which ought to also be clean and totally free of impurities.N46 hydraulic oil is recommended.
4. The power unit should be mounted horizontally.
5. Check the oil degree within the tank following the original operating from the energy unit.
six. Oil changing is needed after the original a hundred operation hours, afterwards once every 3000 hours.